3F, Block A5, Guantian Huafeng Industrial Park, Beihuan Road, Shiyan, Bao'an, Shenzhen, Guangdong, China+86 755 29196339 · [email protected]

Model page

IC4810-AUTO-2pins pre-programmed pixel light

A pre-programmed pixel light that runs its automatic RGB sequence without a controller, on a 2-pin connector system.

IC4810-AUTO-2PINS — AC 24V / 110V / 127V · RGB AUTO · IP66

Spec plate
Input voltageAC 24V / 110V / 127V
Lamp power2.88W
Programmed sequence1-10 or 1-16
LED chipSMD 5050
Number of LEDs12
Specification graphic for the IC4810-AUTO-2pins pixel light
The model's specification graphic, reproduced from its product page.

The pixel that runs itself

The IC4810-AUTO-2pins removes the controller from the pixel-light equation. Its sequence is programmed into the light itself — an automatic RGB programme in steps — so a structure wired only for power lights up in motion. On the maker's specification graphic reproduced on this page, the model's dimensions and parameters are drawn alongside the unit itself.

That single design decision reorganises the whole installation. There is no control cable to run, no controller to mount and seal, and nothing to programme at commissioning. Spares are interchangeable by construction: any unit of the same programme variant runs its stored sequence from the moment it is powered.

Specification and packing

Input voltageAC 24V / 110V / 127V
Lamp power2.88W
Programmed sequence1-10 or 1-16
LED chipSMD 5050
Number of LEDs12
ColourRGB Auto
IP ratingIP66
Beam angle≥140°
Lifespan≥50000h

Packing data

Per bag50 pcs
Per carton600 pcs
Gross weight22 kg per carton
Carton size46.5 x 46 x 28 cm

Notes on this model

  • PCB with plastic cover and base; 2-pin connectors.
  • Gluing process.
  • Automatic RGB pre-programmed sequence — no separate controller needed for the sequence itself.
  • Customised requests noted on the product page include logo and transparent or milky cover.

Two pins, a cover, and a glued board

The unit is built on a 2-pin connector system — power in, power through — with a PCB under a plastic cover and base, and a gluing process, as its product page states. Fewer conductors than its programmable sibling is not a compromise here; it is the physical form of the no-controller idea, and it makes long outlines simple to wire and simple to fault-find. The published rating for the sealed unit is IP66, with a beam angle of at least 140 degrees and a lifespan of at least 50,000 hours.

Customised requests noted on the product page include logo and a transparent or milky cover. The cover choice is an optical one: transparent keeps the point of light sharp, milky diffuses it into a softer dot, and the same structure can want either depending on viewing distance.

Canopies, outlines and fairground frames

A self-running pixel belongs where control is hardest to add: rotating structures, sealed features, and outlines maintained by crews who should never need a programmer. Carousel canopies are the natural home — the structure moves, the wiring is power only, and the effect is present from the first evening.

Fairground outlines and signage accents take the same bargain. What is given up is choreography: the sequence cannot be rewritten for an event. The comparison page against the programmable line prices that trade, and buyers with a fixed effect in mind trade choreography for simplicity in every currency that matters — hardware, installation hours and maintenance.

Ask about the IC4810-AUTO-2pins

Fields marked * are required.

Before you order

Request a quotation for this model — one form covers every line, and the reply quotes against your model, quantity and destination.