Model page
F720-200W RGB flood light
A 200W RGB flood light with RF remote control for stage washes, facades and outdoor scenes.
F720-200W — 200W · RGB · IP65 · RF REMOTE
| Input voltage | AC 100V-240V, 277V |
|---|---|
| Frequency | 50Hz-60Hz |
| Power factor | >0.9 |
| Working voltage | AC 110V-220V |
| LED chip | SMD 5050 |
A wash of colour, thrown from one fixture
The F720-200W is the catalogue's flood: a single fixture whose job is to cover a surface — a stage backdrop, a facade, an outdoor scene — in one colour field. Its product page publishes an unusually complete table, reproduced in full below: electrical input across two ranges, the LED count behind the lens, the colour it produces, its working-temperature range, colour rendering, ingress grade and the materials its body is built from.
Floods are judged as a set: count the fixtures against the surface to be covered, and check the set will survive where it is mounted.
Specification and packing
| Input voltage | AC 100V-240V, 277V |
| Frequency | 50Hz-60Hz |
| Power factor | >0.9 |
| Working voltage | AC 110V-220V |
| LED chip | SMD 5050 |
| LED quantity | 120 pcs |
| Lamp power | 200W |
| Luminous colour | RGB |
| Working temperature | -25 to 55°C |
| CRI | Ra>75 |
| IP grade | IP65 |
| Working lifespan | 50000 hours |
| Lamp body material | PC, aluminum alloy, stainless steel |
| RF remote distance | More than 200m, as stated on the product page |
Packing data
| Per carton | 1 pc |
| Gross weight | 6.5 kg |
| Net weight | 6.2 kg |
| Carton size | 39 x 34 x 16 cm |
Notes on this model
- RF remote control is part of the product description on the company page.
- Lamp body combines PC, aluminum alloy and stainless steel.
Built for outdoor scenes
The body combines PC, aluminum alloy and stainless steel, and the page prints an ingress grade intended for outdoor work — the two rows of the table that decide whether a facade installation is a season's job or a permanent one. The model's specification table also gives its remote-control range.
A buyer checking this fixture against a specification written by someone else can work row by row through the model's table.
Mounted high on a facade or flown over a stage, the fixture is aimed once and then left to work at a ladder's distance, so the remote carries the daily use: colour changes and scene calls are made from the ground, without anyone going up to the unit. That is the working pattern a flood set is planned around — the fixtures stay fixed in place, and the colour is run from below.
Washes, facades and event scenes
Stage washes are the home application: rows of floods along a backdrop, colour following the show. Facades take the same fixture outdoors for events and seasons, and outdoor scenes — entrances, gardens, temporary structures — use it where one controlled colour field is the whole design.
Costing a wash starts with coverage, not with a unit: measure the surface, read the table, and put the set into the inquiry. The flood-lights series page places this model among its sub-family, and the stage line page shows the strings and strip that usually complete the picture around it.
Ask about the F720-200W
Before you order
Request a quotation for this model — one form covers every line, and the reply quotes against your model, quantity and destination.